Watchguard Firebox X5000 Guia do Utilizador descarregar pdf (Página 37)

Migration Guide 33

Putting Fireware on the Firebox

Using fbxinstall.exe

You can also use the Fbxinstall.exe utility to install Fireware 8.0. fbxinstall.exe is a

command line utility that allows you to:

• Upgrade a Firebox X with WFS 7.x firmware and a WFS 7.x configuration to Fireware Pro

• Restore an upgraded Firebox from WFS 8.0 back to its original WFS 7.x software and

configuration

Restoring a Backup Image

This process restores a backup image to a Firebox running WFS 8.0.

1 Connect a serial cable between the Firebox and your management station.

If you have more than one com port note which port you use.

2 Open a command prompt.

3 Type

fbxinstall

4 To restore a backup image type

fbxinstall 10.10.10.1/24 -restore 10.10.10.1/24.fbi

Where 10.10.10.1/24 is the trusted IP address and 10.10.10.1/24.fbi is the Firebox backup file. The

installation process automatically defaults to com port 1.

5 Turn off power to the Firebox X.

Press any key.

6 Turn on power to the Firebox X.

7 A maintenance utility is sent to the Firebox.

8 The installation program contacts the Firebox.

9 The backup file is installed on the Firebox.

The installation completes.

Upgrading to Fireware Pro

This is a secondary method of installing appliance software on the Firebox X. Once this processis

complete you need to use the Quick Setup wizard.

1 Connect a serial cable between the Firebox and your management station.

If you have more than one com port note which port you use.

2 Open a command prompt.

3 Type

fbxinstall

4 To install Fireware 8.0 type

fbxinstall 10.10.10.1/24

Where 10.10.10.1/24 is the trusted IP address of the Firebox. The installation process automatically

defaults to com port 1.

5 Turn off power to the Firebox X.

Press any ket

6 Turn on power to the Firebox X.

7 A maintenance utility is sent to the Firebox.

8 The installation program contacts the Firebox.

9 WFS 8.0 is installed on the Firebox.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 77 78

Comentários a estes Manuais

Sem comentários

Watchguard Firebox X5000 Guia do Utilizador Página 37

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Watchguard Firebox X5000