Watchguard V2 Especificações descarregar pdf (Página 25)

4.3. Adding a Detector

TO ADD A DETECTOR

Safety Lock must

be off

Ensure Safety Lock has been turned off within the last 5

minutes. See Section 4.2.

Press both buttons

for 3 seconds

Enter Programming mode by pressing buttons 1 & 2

together for 3 seconds. The siren will beep 3 times to

confirm you have entered programming mode.

Press 1 time

Within 3 seconds, press Button 1 to select detector

programming. You will hear 1 beep as confirmation.

Press 1 time

Within 30 seconds, press Button 1 to ADD a detector.

You will hear 1 beep as confirmation.

Open the detector

you wish to add

Trigger the detector to be added. If you are learning a

Passive Infrared detector remove the front cover or press

the tamper switch then release. Learning mode will

timeout in 60 seconds. When the system has successfully

received the code from the detector, the siren will beep the

number of times of the zone that the detector has to learn

into and will do so whenever any unlearnt detector

transmits.

Continued on next page…

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Sem comentários

Watchguard V2 Especificações Página 25